DS75LXS+【PDF 8/13 页】IC THERMOMETER/STAT DIG 8-SOIC

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录40

4页 5页 6页 7页 [8页]9页 10页 11页 12页

DS75LX: Digital Thermometer and Thermostat with Extended Addressing

8 of 13

Table 2. Configuration Register Bit Descriptions

BIT NAME

DESCRIPTION

Reserved

Power-Up State = 0

The master can write to this bit, but it always reads out as a 0.

Conversion Resolution Bit 1

Power-Up State = 0

Sets conversion resolution (see Table 3).

Conversion Resolution Bit 0

Power-Up State = 0

Sets conversion resolution (see Table 3).

Thermostat Fault Tolerance Bit 1

Power-Up State = 0

Sets the thermostat fault tolerance (see Table 4).

Thermostat Fault Tolerance Bit 0

Power-Up State = 0

Sets the thermostat fault tolerance (see Table 4).

POL

Thermostat Output (O.S.) Polarity

Power-Up State = 0

POL = 0 O.S. is active low.

POL = 1 O.S. is active high.

Thermostat Operating Mode

Power-Up State = 0

TM = 0 Comparator mode.

TM = 1 Interrupt mode.

See the OperationThermostat section for a detailed description of

these modes.

Shutdown

Power-Up State = 0

SD = 0 Active conversion and thermostat operation.

SD = 1 Shutdown mode.

See the Shutdown Mode section for a detailed description of this mode.

Table 3. Resolution Configuration

THERMOMETER

RESOLUTION (BITS)

MAX CONVERSION

TIME (ms)

100

200

Table 4. Fault Tolerance Configuration

CONSECUTIVE OUT-OF-LIMITS

CONVERSIONS TO TRIGGER O.S.

The four DS75LX registers each have a unique two-bit pointer designation, which is defined in Table 5. When

reading from or writing to the DS75LX, the user must point the DS75LX to the register that is to be accessed.

When reading from the DS75LX, once the pointer is set it remains pointed at the same register until it is changed.

For example, if the user wants to perform consecutive reads from the temperature register, the pointer only has to

be set to the temperature register one time, after which all reads will automatically be from the temperature register

until the pointer value is changed. On the other hand, when writing to the DS75LX, the pointer value must be

refreshed each time a write is performed, even if the same register is being written to twice in a row.

At power-up, the default pointer value is the temperature register so the temperature register can be read

immediately without resetting the pointer.

Changes to the pointer setting are accomplished as described in the 2-Wire Serial Data Bus.

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式